Harding Instruments MicroComm DXL

To Next Page

To Previous Page

IMS-640/641 VoIP Intercom Master Station Operating Instructions MicroComn DXL

Page iii MN-DXL-IMS-640/641-1.0

To Change Programming (Music)..................................................................................................... 38

Activating a Signal ................................................................................................................................38

Main Page

Table of Contents3
Section 1 - Introduction7
Purpose of this Manual7
Welcome to the Microcomm DXL7
Elements of the System7
The Master Station8
This Operating Manual8
Notation Used in this Manual9
Section 2 - Getting Started11
What Is a DXL Intercom Station11
How the DXL System Handles Alarms11
How the DXL Handles Call Requests11
Intercom Stations12
Initiating a Call Request12
Disabled Stations12
Intercom Calls12
Station Identification13
Station Priority13
IMS-640/641 Voip Intercom Master Station13
Display14
Telephone Keys14
Telephone Keypad15
Navigation Keys15
Function Keys15
Hold Key15
Release Key15
Audio Keys16
Beeper16
Loudspeaker and Microphone16
Handset17
Section 3 - Principles of Operation19
Menu System19
Function Menus20
Use of the Right-Arrow Key21
List of Functions22
Function22
Lists23
How Lists Are Displayed24
Alarm Code24
ID Number and Name25
List Order25
List Sizes25
Section 4 - Intercom Procedures27
How to Select a List27
How to Select a Station28
Scrolling28
If You Know the ID Number of the Station28
A Shortcut to Help with Long Lists29
To Back out of Your Selection29
Making a Call to a Station30
Functions Available When You Are Making a Call31
Level Setting Adjustments31
Call Requests32
Responding to a Call Request32
Acknowledging the Call Request32
Ending the Call32
Section 5 - Enabling and Disabling Stations33
Enabling/Disabling Intercom Stations33
Enabling/Disabling Call Request Switch at an Intercom Station33
Enabling Call Request Switch from the Disabled List34
Enabling/Disabling Tamper Alarm at an Intercom Station34
Enabling/Disabling Music at an Intercom Station34
Setting the Audio Level Alarm Thresholds for an Intercom Station34
Section 6- Monitoring Procedures37
Monitoring a Station37
Background Monitoring38
Monitoring a Visiting Booth39
Section 7 -Alarm Handling Procedures41
Section 8 - Other Master Station Procedures43
Changing Master Station Display and Sound Volume Settings43
Changing Clock Display Mode43

Harding Instruments MicroComm DXL - Page 5

Table of Contents