106
CONTENTS
CFV 100C
User Manual
3.6 FLASH SETTINGS
Flash
Sync
Exposure Lock until Flash Ready
Sync
Main Menu > Flash > Sync
Set to trigger the flash at the beginning or end of the exposure.
Normal: To trigger at the beginning of the exposure.
Rear: To trigger at the end of the exposure.
Exposure Lock until Flash Ready
Main Menu > Flash > Exposure Lock until Flash Ready
Set whether to block a capture if the flash is not ready. If enabled, the capture will be
blocked. While disabled, the capture will be allowed.
This menu will appear when using with the 907X.
To Next Page
Loading...
