Hasselblad CFV 100C - Using CFV 100 C with Other Cameras

CFV 100C
User Manual
CONTENTS
24
1.7 USING CFV 100C WITH OTHER CAMERAS
When using the CFV 100C (hereinafter referred to as CFV) with other cameras, the control
method and connection vary depending on whether the mechanical shutter or electronic
shutter is used.
Mechanical Shutter
Control
Method
Camera Model
Remark
Phocus
Remote
Control
503CW/503CWD/503CXi +
Winder CW
Exposure Cable 503CW is required
for Phocus remote control of 503CW
+ Winder CW
500EL, 500EL/M
500ELX, 553ELX
Exposure Cable EL is required for
Phocus remote control of EL or EL/M
555 ELD /
Cable-Free
Operation
500C, 500C/M
501 C, 501CM
503CX, 503CXi, 503CW, 503CWD
/
SWC/M
903 SWC
905 SWC
/
Modified 202FA, 203FE, 205TCC,
205FCC
With F type lenses and C/CF/CFi/
CFE lenses in F or C mode (not the
202FA) setting
2000FC, 2000FC/M, 2000FCW,
2003FCW, 201F
Unmodified 202FA, 203FE, 205
TCC, 205FCC
With F type lenses and C/CF/CFi/
CFE lenses in F or C mode (not the
202FA) setting
500EL, 500EL/M
500ELX, 553ELX
555ELD
/
Flash Sync
Input Cable
Required
FlexBody /
ArcBody Shift settings are not recommended
on cameras with wide-angle lenses
and a short lens to image plane
distance
Any view camera with the
Hasselblad V System adaptor