Hasselblad CFV 100C - Page 120

120
CONTENTS
CFV 100C
User Manual
Spirit Level Calibration
Main Menu > General > Spirit Level Calibration
The camera is equipped with an accelerometer to measure the tilt of the camera relative
to the horizontal axis and vertical axis. Spirit level calibration can assist in checking the tilt
angle of the camera.
• In Live View, users can also enter spirit level calibration. Press the circle button under the
touch display to switch the display until Exposure Information + Spirit Level appears.
Calibration Modes
There are two modes for the spirit level, Default and Custom. Tap the icon on the upper left
corner to select. Default Mode uses the standard factory settings. In Custom Mode, users
can set the standard.
Setting Custom Mode
1. Tap the icon on the upper left corner and
tap Custom in the pop-up dialogue.
2. Adjust the camera horizontally and
vertically to the desired position and tap
Calibrate.
3. The two white circles are now moved to the
centre position and turn green, indicating
that the new spirit level standard is set.
Calibration Instructions
1. Tap the icon on the upper left corner and tap Default or Custom in the pop-up dialogue.
2. Adjust the tilt of the camera left/right and up/down until the solid white circle is in the
centre and turns green.
Spirit Level
Calibrate
Default Custom