CFV 100C
User Manual
CONTENTS
29
A
B
Using CFV with SWC Camera
Select SWC in Camera Body Settings in
Main Menu when using the following
camera models.
• SWC/M
• 903 SWC
• 905 SWC
• Old versions of SWC cameras are not
supported.
• Make sure the status LED on the CFV is
green before releasing the camera.
• When releasing the camera, press firmly
on the shutter release button. Pressing
too slowly or stopping halfway can result
in black images.
Start live view with a SWC camera
1. Set B mode on the lens.
2. On the SWC camera, there is a small
lever (time catch) (A). Switch the lever
from 0 to T position (B).
3. Activate Live View from Control Screen
(LV).
4. Press the shutter release.
5. Press the menu button or browse button
to end Live View.
6. Move the time catch back to 0 position,
and the shutter will close.