Hasselblad CFV 100C User Manual

CFV 100C
User Manual
CONTENTS
34
Using Camera with Electronic Shutter
When the camera body is set to Any (Electronic Shutter) in the settings, the electronic
shutter of the sensor is used. This is for use with lenses or cameras without a shutter.
Refer to the Live View section and Control Screen section for more details about the usage
of the electronic shutter. See the available settings for the electronic shutter in the Settings
section.
Using with Flash
The flash can be used with most
combination of CFV and camera body.
• The flash is not supported when the
camera body is set to Any (Electronic
Shutter) in the settings.
• For studio use where using a desktop
computer and a flash system connected
to the mains outlet, make sure that both
the computer and flash are connected to
mains outlets with a common ground.
• Users can also use the remote flash
trigger to electrically separate the flash
from the camera and computer.
Using 500 Camera
The flash sync cable can be connected
directly to the sync socket of the lens (A).
Using Modified 200 Camera with C
Type Lens
When using a C type lens in the C shutter
mode, connect the flash sync cable to the
sync socket of the lens (B).
A
B

Hasselblad CFV 100C Specifications

General

Sensor Type	CMOS
Sensor Size	43.8 x 32.9 mm
Resolution	100MP
Image Stabilization	No
Video Recording	No
Storage Media	CFexpress Type B
Viewfinder	Optional (via accessory)
Connectivity	USB-C, Wi-Fi
Battery	Rechargeable Lithium-Ion Battery