Hasselblad CFV 100C User Manual

48
CONTENTS
CFV 100C
User Manual
The screen display takes using with the 907X camera body as an example. When using with
other cameras and with the camera body set to Any (Electronic Shutter), most of the screen
elements (except for focus mode, drive mode, focus point, AE-L, and aperture) will be
displayed. When the camera body is set to other options, only WB will be displayed.
Users can go to Control Screen to adjust the camera parameters displayed in Live View.
Refer to the Control Screen section for more information.
1. White Balance (WB)
Tap the area to open the option list. Swipe on the touch display or toggle the control
dial on the 907X camera body to select from the list. The settings are the same as WB on
Control Screen. Refer to the Control Screen section for more information.
2. ISO
Tap to open the option list for ISO adjustment. Swipe on the touch display or toggle the
control dial on the 907X camera body to select from the list.
3. Drive Mode
There is no icon displayed when Single or Continuous Drive mode is selected. When
Self-Timer, Interval, Exposure Bracketing, or Focus Bracketing Drive mode is selected, the
corresponding icon will appear. Refer to the Drive Modes section for more information
on instructions for each mode.
1
2
5
14
7 8 1211 13
Using with other cameras and with the camera body set to Any
(Electronic Shutter)

Hasselblad CFV 100C Specifications

General

Sensor Type	CMOS
Sensor Size	43.8 x 32.9 mm
Resolution	100MP
Image Stabilization	No
Video Recording	No
Storage Media	CFexpress Type B
Viewfinder	Optional (via accessory)
Connectivity	USB-C, Wi-Fi
Battery	Rechargeable Lithium-Ion Battery