84
CONTENTS
CFV 100C
User Manual
2.6 BUILT-IN SSD
The digital back has a built-in 1TB SSD to store images. Connect the camera to a computer
to use the built-in SSD as mass storage for data read/write.
Storing Files to SSD
Go to Main Menu > Storage > Primary Slot, and select SSD. Check the free space of the SSD
in the Info section.
Formatting SSD
• Formatting SSD will erase all the contents on the SSD. Operate with caution.
1. In the Storage settings, scroll to the bottom and select Format SSD.
2. Press the browse button under the touch display to perform formatting.
3. Wait for formatting to be completed.
Checking SSD Storage Status
Check the SSD storage status on Control Screen.
Using the SSD as Mass Storage
1. Connect camera to a computer using a USB-C cable of USB 2.0 or above.
2. Tap Mass Storage in the pop-up dialogue on the camera touch display. will be shown
on the touch display.
3. The camera SSD will be connected to the computer as a mobile storage device and data
read/write to the SSD is available.
• After the camera is connected to the computer, if Skip is selected on the touch display,
the built-in SSD will not be connected to the computer. Reconnect the camera to the
computer and select the correct option.
To Next Page
Loading...
