Hasselblad X2D 100C User Manual

100
X2D 100C
User Manual
CONTENTS
Spirit Level Calibration
Main Menu > General > Spirit Level Calibration
The camera is equipped with an accelerometer to measure the tilt of the camera relative
to the horizontal axis and vertical axis. Spirit level calibration can assist in checking the tilt
angle of the camera.
In Live View, users can also enter spirit level calibration. Press the circle button on the
camera body to switch the display until Exposure Information + Spirit Level appears.
Calibration Modes
There are two modes for the spirit level, Default and Custom. Tap the icon on the upper left
corner to select. Default Mode uses the standard factory settings. In Custom Mode, users
can set the standard.
Setting Custom Mode
1. Tap the icon on the upper left corner and
tap Custom in the pop-up dialogue.
2. Adjust the camera horizontally and
vertically to the desired position and tap
Calibrate.
3. The two white circles are now moved
to the centre position and turn green,
indicating that the new spirit level
standard is set.
Calibration Instructions
1. Tap the icon on the upper left corner and tap Default or Custom in the pop-up dialogue.
2. Adjust the tilt of the camera left/right and up/down until the solid white circle is in the
centre and turns green.
Spirit Level
Calibrate
Default Custom

Hasselblad X2D 100C Specifications

General

Sensor Type	CMOS
Effective Pixels	100MP
Sensor Size	43.8 x 32.9 mm
ISO Sensitivity	64-25600
Continuous Shooting Speed	3.3 fps
Battery Life	420 shots (CIPA)
Dimensions	148.5 x 106 x 74.5 mm
Shutter Speed	60 min to 1/6000 sec
Image Stabilization	5-axis
Image Processor	Hasselblad Natural Colour Solution
Viewfinder	5.76MP OLED EVF
Display	3.6" 2.36MP Touchscreen LCD
Storage	CFexpress Type B
Connectivity	USB-C, Wi-Fi
Battery	Rechargeable Li-ion battery
Weight	895 g (with battery)