Hasselblad X2D 100C User Manual

62
X2D 100C
User Manual
CONTENTS
Exposure Bracketing
The camera will automatically make a pre-determined number of exposures with a preset
exposure adjustment difference between each frame.
Amount: how much exposure difference between each exposure.
Frames: the number of exposures in the sequence.
Initial Delay: a delay between shutter release and first exposure.
Param in M: which of aperture or shutter speed to change if Exposure bracketing is used in
Manual Exposure Mode.
Sequence: the order to change the exposure compensation for each frame.
When Finished: determines if the function shall be active after a completed cycle or not.
Configure exposure bracketing parameters and press the shutter release button to start
exposure bracketing. If Initial Delay is set, the camera will start a countdown before shooting
the first image. Shooting will start after the preset delay ends.
The touch display, EVF, and top display will show information such as exposure
compensation and shot frames/total frames during the sequence. Press the delete button to
exit exposure bracketing if it is required to exit before completed.
• Live View and Image Browsing are disabled after the exposure bracket starts.
• Light metering, focusing, and Auto WB is performed before the first exposure and applied
to all images in sequence.
• When the shutter speed is set to 16s or more, the camera will turn off the display to save
battery 5 seconds after shooting starts. The display will light up automatically before the
next image is shot. Users can also wake up the display by pressing the ON/OFF button.
• Exposure bracketing on the camera is disabled when the camera is connected to the
Phocus software on the computer or the Phocus Mobile 2 app on a mobile device. In this
case, use the capture sequencer in Phocus to achieve exposure bracketing.
80%
200
5.6 90
f/
EV
+1.512.0
+0.7
CFe
SSD
ISO
Drive Mode
Single
Continuous
Self Timer
Exposure
Bracketing
Interval
Parameter in M
S
Sequence
0, +, -
When Finished
Exit
Amount
1/2
Initial Delay
None
Frames
3
Exposure Bracketing
Exit
+1.5EV
3099
1/3
1:00:00
Exposure Bracketing

Hasselblad X2D 100C Specifications

General

Sensor Type	CMOS
Effective Pixels	100MP
Sensor Size	43.8 x 32.9 mm
ISO Sensitivity	64-25600
Continuous Shooting Speed	3.3 fps
Battery Life	420 shots (CIPA)
Dimensions	148.5 x 106 x 74.5 mm
Shutter Speed	60 min to 1/6000 sec
Image Stabilization	5-axis
Image Processor	Hasselblad Natural Colour Solution
Viewfinder	5.76MP OLED EVF
Display	3.6" 2.36MP Touchscreen LCD
Storage	CFexpress Type B
Connectivity	USB-C, Wi-Fi
Battery	Rechargeable Li-ion battery
Weight	895 g (with battery)