Hasselblad X2D 100C User Manual

X2D 100C
User Manual
CONTENTS
20
1.7 INSERTING THE MEMORY CARD
The camera is equipped with a built-in 1TB SSD. Users can expand the capacity further with
a CFexpress Type B memory card. Refer to the Memory Cards section for more information
about memory card instructions.
1. Slide the card slot lid toward the touch display to open.
2. Insert the memory card into the card slot gently. Pay attention to the facing direction
of the memory card. If the card cannot be inserted properly, make sure it is facing the
correct direction. Do not insert by force.
3. Close the card slot lid by pressing it down and sliding it in place.
To remove the memory card, open the card slot lid, press the memory card to release
it, remove it, and close the card slot lid.

Hasselblad X2D 100C Specifications

General

Sensor Type	CMOS
Effective Pixels	100MP
Sensor Size	43.8 x 32.9 mm
ISO Sensitivity	64-25600
Continuous Shooting Speed	3.3 fps
Battery Life	420 shots (CIPA)
Dimensions	148.5 x 106 x 74.5 mm
Shutter Speed	60 min to 1/6000 sec
Image Stabilization	5-axis
Image Processor	Hasselblad Natural Colour Solution
Viewfinder	5.76MP OLED EVF
Display	3.6" 2.36MP Touchscreen LCD
Storage	CFexpress Type B
Connectivity	USB-C, Wi-Fi
Battery	Rechargeable Li-ion battery
Weight	895 g (with battery)