89
X2D 100C
User Manual
CONTENTS
Preview
Main Menu > Display > Preview
Set the preview time and enable the touch display or EVF preview to preview the latest
captured image after exposure ends.
Preview Time
When it is set to 0.5s, 1s, 2s, 4s, or 8s, the display will return to Live View after the preset
time.
When it is set to Hold, the display will stay in Browse Mode until users change to a different
screen.
Rear Screen
If enabled, the display will switch to preview after shooting in Live View on the touch display.
EVF
If enabled, the display will switch to preview after shooting in Live View in the EVF.
Overexposure Warning
If enabled during preview, the overexposure areas in the image will flash as an indication.
To Next Page
Loading...
