EasyManuals Logo

Hasselblad X2D 100C User Manual

Hasselblad X2D 100C
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
117
X2D 100C
User Manual
CONTENTS
XH CONVERTER 0,8
CP.HB.00000627.01
The XH Converter 0,8 is an accessory for
using HC/HCD lenses on X System cameras.
It reduces the focal length of the attached
lens by a factor of 0,8x as well as increases
the maximum and minimum aperture with
2/3 stops.
The following cameras and lenses are
supported:
Hasselblad X System cameras, X2D
100C with firmware 1.0.0 or later, X1D
with firmware 1.25.0 or later, or X1D II
50C/907X/CFV II with firmware 1.4.0 or
later.
All Hasselblad HC and HCD lenses,
except HC120 and HC120-II with
firmware older than 18.0.0.
Only certain functions of the camera are
supported when using an H System lens.
Lenses with firmware 18.0.0 to 19.0.3
must be upgraded to 19.1.0 or later.
Lenses with firmware older than 18.0.0
will have manual focus only.
HCD lenses were originally designed for a
smaller format than HC lenses. Therefore
some reduction of performance in
extreme corners can occur.

Other manuals for Hasselblad X2D 100C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hasselblad X2D 100C and is the answer not in the manual?

Hasselblad X2D 100C Specifications

General IconGeneral
Sensor TypeCMOS
Effective Pixels100MP
Sensor Size43.8 x 32.9 mm
ISO Sensitivity64-25600
Continuous Shooting Speed3.3 fps
Battery Life420 shots (CIPA)
Dimensions148.5 x 106 x 74.5 mm
Shutter Speed60 min to 1/6000 sec
Image Stabilization5-axis
Image ProcessorHasselblad Natural Colour Solution
Viewfinder5.76MP OLED EVF
Display3.6" 2.36MP Touchscreen LCD
StorageCFexpress Type B
ConnectivityUSB-C, Wi-Fi
BatteryRechargeable Li-ion battery
Weight895 g (with battery)

Related product manuals