Hasselblad X2D 100C User Manual

119
X2D 100C
User Manual
CONTENTS
XPan Lens Adapter
CP.HB.00000036.01
The XPan Lens Adapter is used to attach
lenses that was made for the XPan camera.
Available XPan lenses were 5,6/30mm,
4/45mm and 4/90mm.
• XPan Lenses had no built-in shutter.
Consequently, they can only be used
when the electronic shutter of the camera
is activated.
• Users can use Auto Zoom to assist manual
focusing.
Battery Charging Hub
CP.HB.00000397.01 (EMEA)
CP.HB.00000395.01 (United Kingdom)
CP.HB.00000392.01 (North America/Japan)
CP.HB.00000396.01 (China)
CP.HB.00000393.01 (South Korea)
CP.HB.00000394.01 (Australia/New Zealand)
Streamlining the battery charging process,
the Hasselblad Battery Charging Hub
contains dual slots that support the
simultaneous charging of two batteries. An
integrated USB Type-C connector supports
mains power via an included power supply
or from common external USB battery banks
(purchased separately). Front-facing LEDs
indicate status and capacity when charging,
or users can use the Battery Charging Hub
to check battery levels simply by inserting a
battery and pressing a single button.

Hasselblad X2D 100C Specifications

General

Sensor Type	CMOS
Effective Pixels	100MP
Sensor Size	43.8 x 32.9 mm
ISO Sensitivity	64-25600
Continuous Shooting Speed	3.3 fps
Battery Life	420 shots (CIPA)
Dimensions	148.5 x 106 x 74.5 mm
Shutter Speed	60 min to 1/6000 sec
Image Stabilization	5-axis
Image Processor	Hasselblad Natural Colour Solution
Viewfinder	5.76MP OLED EVF
Display	3.6" 2.36MP Touchscreen LCD
Storage	CFexpress Type B
Connectivity	USB-C, Wi-Fi
Battery	Rechargeable Li-ion battery
Weight	895 g (with battery)