EasyManuals Logo

Hasselblad X2D 100C User Manual

Hasselblad X2D 100C
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
X2D 100C
User Manual
CONTENTS
15
iOS Device Support
iPad models with 3GB of RAM or more and iPhone X or later
models running iOS 15.0 or later
Platform Support macOS 10.15 or later, or Windows 7 64-bit or later
Host Connection Type USB 3.1 Gen2 Type-C connector (transfer speed up to 10Gbit/s)
Operating
Temperature
-10° to 45° C (14° to 113° F)
Operating Humidity No more than 85% without condensation
Wi-Fi 802.11b/a/g/n/ac/ax, Wi-Fi with 2×2 MIMO
Supported Lenses
Hasselblad XCD lenses with built-in electronically controlled leaf
shutter and aperture. Automatic or manual focusing with instant
manual focus override. Lens shades can be mounted in reverse for
transport.
Compatible with all H System Lenses and some H System
accessories using the XH Lens Adapter. Also compatible with V
System and XPan Lenses using the XV or XPan Lens Adapter.
Shutter
Electronically controlled leaf shutter with speeds up to 1/4000s.
Flash sync at all speeds. Optional electronic shutter
Shutter Speed
68 min to 1/4000s with XCD Lenses. * Up to 1/800s or 1/2000s
with HC/HCD Lenses. Electronic shutter 68 min to 1/6000s.
Flash Sync Speed Flash can be used at all shutter speeds. Mechanical shutter only.
Flash Control
TTL centre weighted system. Compatible with Nikon System
flashes. ISO range 64 to 25600. Flash output can be adjusted (-3 to
+3 EV) for fill-in purposes independent of ambient light. Sync at all
shutter speeds. Mechanical shutter only.
Flash Compatibility
In TTL-mode, the following Nikon Flash products can be used:
SB-300, SB-500, SB-5000, SB-700, SB-900, SB-910. The following
Profoto products can be used in TTL-mode: A1, B1 and B2 with
Nikon interface.
Focusing
Autofocus single (AF-S) and manual focus (MF). Instant manual
focus override. Automatic focusing using phase and contrast
detection. Focus indicator or 100% zoom available in MF. Up to
294 Phase Detection Autofocus (PDAF) zones.
Exposure Metering Spot, centre weighted, and centre spot
Power Supply
Rechargeable Li-ion battery (7.27VDC/3400mAh). Can be charged
in-camera via the USB-C port on the camera body. Charging time
is approx. two hours using the included 30W USB-C charger.
Dimensions 148.5 × 106 × 74.5mm
Weight 895g (camera body with the battery); 790g (camera body only)
* The fastest shutter speed varies depending on the lens in use. Refer to the datasheet of
the corresponding lens.

Other manuals for Hasselblad X2D 100C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hasselblad X2D 100C and is the answer not in the manual?

Hasselblad X2D 100C Specifications

General IconGeneral
Sensor TypeCMOS
Effective Pixels100MP
Sensor Size43.8 x 32.9 mm
ISO Sensitivity64-25600
Continuous Shooting Speed3.3 fps
Battery Life420 shots (CIPA)
Dimensions148.5 x 106 x 74.5 mm
Shutter Speed60 min to 1/6000 sec
Image Stabilization5-axis
Image ProcessorHasselblad Natural Colour Solution
Viewfinder5.76MP OLED EVF
Display3.6" 2.36MP Touchscreen LCD
StorageCFexpress Type B
ConnectivityUSB-C, Wi-Fi
BatteryRechargeable Li-ion battery
Weight895 g (with battery)

Related product manuals