Hasselblad X2D 100C User Manual

X2D 100C
User Manual
CONTENTS
23
2.1 OVERVIEW
1
10
33
34
35
2
3
4
5
6
7
8
9
11
12
12
13
14
15
16
17
18
19
20
22
21
23
24
25
26
27
28
29
30
31
32
34
35
33
1. ON/OFF Button
When the camera is powered off, press once to check the battery level on the top
display. Press and hold for 1 second to power on the camera and the “H” logo will
appear on the top display and touch display.
After a few seconds (customisable) of inactivity, the camera will enter Standby Mode.
Press the button once to enter or exit Standby Mode.
Press and hold the button to power off the camera completely when it is powered on
(not in Standby Mode).
2. Top Display
When the camera is powered off, press the ON/OFF button once to check the battery
level on the top display.
When the camera is powered on, the display will show certain camera statuses and
parameters, such as ISO, battery level, aperture, shutter speed, exposure mode, and
remaining frames. The display will also show the available options after entering the
menu for specific settings.
3. Shutter Release Button
This button has two positions. Press half way to activate the camera from Standby Mode,
start auto-focusing and exposure metering. Press all the way down to release the shutter.
The chosen exposure procedure, for example, Self Timer, is also activated with this
button.

Hasselblad X2D 100C Specifications

General

Sensor Type	CMOS
Effective Pixels	100MP
Sensor Size	43.8 x 32.9 mm
ISO Sensitivity	64-25600
Continuous Shooting Speed	3.3 fps
Battery Life	420 shots (CIPA)
Dimensions	148.5 x 106 x 74.5 mm
Shutter Speed	60 min to 1/6000 sec
Image Stabilization	5-axis
Image Processor	Hasselblad Natural Colour Solution
Viewfinder	5.76MP OLED EVF
Display	3.6" 2.36MP Touchscreen LCD
Storage	CFexpress Type B
Connectivity	USB-C, Wi-Fi
Battery	Rechargeable Li-ion battery
Weight	895 g (with battery)