13
3-2. Mounting the access point to a ceiling
To mount the access point to a ceiling, please follow the instructions below and refer to diagram A & B.
For Wooden Ceilings (refer to diagram A):
1. Place the ceiling mount bracket to a ceiling in your desired location and insert screw iii through hole i
(x 2)and tighten to fix the bracket in place.
2. When the ceiling bracket is in place, inset screw iv into hole v (x 2) on the access point.
3. Fix the access point to the ceiling bracket by inserting the attached screws iv into hole vi and twisting
the access point.
4. Lock the access point firmly into place when by twisting it to align screws iv with the grooves in the
ceiling mount.
For Other Ceilings (refer to diagram B):
1. Place the ceiling mount bracket to a ceiling in your desired location and Insert screw ii through hole i (x
2) and tighten to fix the bracket in place, as shown in A.
2. Insert screw iii through hole i and into the rear of screw ii and tighten to provide additional strength.
3. When the ceiling bracket is in place, insert screw iv into hole v (x 2) on the access point.
4. Fix the access point to the ceiling bracket by inserting the attached screws iv into hole vi and twisting
the access point.
5. Lock the access point firmly into place by twisting it to align screws iv with the grooves in the ceiling
mount.
To Next Page
Loading...
Need help?
General
