74
Chapter 5 - Appendix
5-1. Configuring your IP address
The access point uses the default IP address 192.168.1.230. In order to access the browser based
configuration interface, you need to modify the IP address of your computer to be in the same IP address
subnet e.g. 192.168.1.x (x = 1-200).
The procedure for modifying your IP address varies across different operating systems; please follow the
guide appropriate for your operating system.
In the following examples, we use the IP address 192.168.1.10 though you can use any IP address in the
range 192.168.1.x (x = 1 – 100).
To Next Page
Loading...
Need help?
General
