Hawking HW12ACM User Manual

16
3-3. T-Rail Mount
To mount the access point to a T-Rail, please follow the instructions below and refer to diagram C, D & E.
1. Select the correct size T-Rail bracket from the two sizes which are included in the package contents.
2. Attach the T-Rail bracket i to hole ii using screw iii (x 2) as shown in C.
If you need more space between the access point and the T-Rail, then additionally use
bracket iv between bracket i and hole ii (x 2), and use the longer screws (x 2) included
in the package contents.
3. Clip the access point onto your T-Rail using the now attached T-Rail bracket.
C

Hawking HW12ACM Specifications

General

Brand	Hawking
Model	HW12ACM
Category	Wireless Access Point
Language	English