32
4-2-2. LAN Port
The “LAN Port” page allows you to configure the settings for your access point’s
two wired LAN (Ethernet) ports.
Select a speed & duplex type for LAN port, or use the “Auto”
value. LAN ports can operate up to 1000Mbps and full-duplex
enables simultaneous data packets transfer/receive.
Enable/disable flow control. Flow control can pause new
session request until current data processing is complete, in
order to avoid device overloads under heavy traffic.
Enable/disable 802.3az. 802.3az is an Energy Efficient Ethernet
feature which disables unused interfaces to reduce power
usage.
To Next Page
Loading...