Hawking HW12ACM User Manual

4
1-4. LED Status
LED Color
LED Status
Description
Blue
On
The access point is starting up.
Purple
On
The access point is on.
Amber
Flashing
Error.
Off
Off
The access point is off.
1-5. Reset
If you experience problems with your access point, you can reset the device back to its factory settings. This
resets all settings back to default.
1. Press and hold the reset button on the access point for at least 20 seconds then release the button.
You may need to use a pin or similar sharp object to push the reset button.
2. Wait for the access point to restart. The access point is ready for setup when the LED is Purple.

Hawking HW12ACM Specifications

General

Brand	Hawking
Model	HW12ACM
Category	Wireless Access Point
Language	English