Hawking HW12ACM User Manual

77
5-1-2. Windows Vista
1. Click the “Start” button (it should be located in the lower-left corner of your computer), then click
“Control Panel”. Click “View Network Status and Tasks”, then click “Manage Network Connections”.
Right-click “Local Area Network”, then select “Properties”. The “Local Area Connection Properties”
window will then appear, select “Internet Protocol Version 4 (TCP / IPv4)”, and then click “Properties”.
2. Select “Use the following IP address”, then input the following values:
IP address: 192.168.1.10
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.

Hawking HW12ACM Specifications

General

Brand	Hawking
Model	HW12ACM
Category	Wireless Access Point
Language	English