57
4-3-5. MAC Filter
Mac filtering is a security feature that can help to prevent unauthorized users
from connecting to your access point.
This function allows you to define a list of network devices permitted to connect to the access point.
Devices are each identified by their unique MAC address. If a device which is not on the list of permitted
MAC addresses attempts to connect to the access point, it will be denied.
To enable MAC filtering, go to “Wireless Settings”
“2.4GHz 11bgn/5GHz 11ac 11an”
“Security”
“Additional Authentication” and select “MAC Filter” (see 4-3-1-3. & 4-
3-2-3).
The MAC address filtering table is displayed below:
Enter a MAC address of computer or network device manually
e.g. ‘aa-bb-cc-dd-ee-ff’ or enter multiple MAC addresses
To Next Page
Loading...