43
Select from WPA/WPA2 Mixed Mode-EAP, WPA2-EAP or WPA-
EAP.
Select “TKIP/AES Mixed Mode” or “AES” encryption type.
Specify a frequency for key renewal in minutes.
WPA-EAP must be disabled to use MAC-RADIUS authentication.
4-3-1-3-6. Additional Authentication
Additional wireless authentication methods can also be used:
MAC Address Filter
Restrict wireless clients access based on MAC address specified in the MAC filter table.
See 4-3-5.MAC Filter to configure MAC filtering.
MAC Filter & MAC-RADIUS Authentication
Restrict wireless clients access using both of the above MAC filtering & RADIUS authentication methods.
MAC-RADIUS Authentication
Restrict wireless clients access based on MAC address via a RADIUS server, or password authentication via a
RADIUS server.
See 4-3-4.RADIUS to configure RADIUS servers.
WPS must be disabled to use MAC-RADIUS authentication. See 4-3-3. for WPS
settings.
Select whether to use MAC address or password
authentication via RADIUS server. If you select “Use the
following password”, enter the password in the field below.
The password should match the “Shared Secret” used in IV-3-4.
RADIUS.
To Next Page
Loading...
Need help?
General
