46
Select “WDS with AP” to use WDS with access point or
“Dedicated WDS” to use WDS and also block communication
with regular wireless clients. When WDS is used, each access
point should be configured with corresponding MAC
addresses, wireless channel and wireless encryption method.
Displays the MAC address of your access point.
Enter the MAC address for up to four other WDS devices you
wish to connect.
Specify the WDS VLAN mode to “Untagged Port” or “Tagged
Port”.
Specify the WDS VLAN ID when “Untagged Port” is selected
above.
Select whether to use “None” or “AES” encryption and enter a
pre-shared key for AES consisting of 8-63 alphanumeric
characters.
To Next Page
Loading...
Need help?
General
