Hawking HW12ACM User Manual

63
Management Protocol
Check/uncheck the boxes to enable/disable specified
management interfaces (see below). When SNMP is enabled,
complete the SNMP fields below.
SNMP Version
Select SNMP version appropriate for your SNMP manager.
SNMP Get Community
Enter an SNMP Get Community name for verification with the
SNMP manager for SNMP-GET requests.
SNMP Set Community
Enter an SNMP Set Community name for verification with the
SNMP manager for SNMP-SET requests.
SNMP Trap
Enable or disable SNMP Trap to notify SNMP manager of
network errors.
SNMP Trap Community
Enter an SNMP Trap Community name for verification with
the SNMP manager for SNMP-TRAP requests.
SNMP Trap Manager
Specify the IP address or sever name (2-128 alphanumeric
characters) of the SNMP manager.
HTTP
Internet browser HTTP protocol management interface
HTTPS
Internet browser HTTPS protocol management interface
TELNET
Client terminal with telnet protocol management interface
SSH
Client terminal with SSH protocol version 1 or 2 management interface
SNMP
Simple Network Management Protocol. SNMPv1, v2 & v3 protocol supported. SNMPv2 can be used with
community based authentication. SNMPv3 uses user-based security model (USM) architecture.

Hawking HW12ACM Specifications

General

Brand	Hawking
Model	HW12ACM
Category	Wireless Access Point
Language	English