HBM TIM40 - Table of Contents

TIM40 A02590_04_E00_00 HBM: public 3
English
1 Safety instructions 5........................................
2 Markings used 9............................................
2.1 The markings used in this document 9..........................
2.2 Symbols on the product 10.....................................
3 Scope of supply 11..........................................
4 Application 12...............................................
5 Structure and mode of operation 13...........................
6 Mounting 14.................................................
7 Removal 15.................................................
8 Mounting the Anybus
[
‐module (accessory) 16................
9 Electrical connection 21......................................
9.1 General information 21........................................
9.2 Shielding design 21...........................................
9.3 Connector pin assignment 21...................................
9.3.1 Connect cable wires to spring‐loaded terminals 23................
9.4 Supply voltage 25.............................................
9.5 Connecting to a PC or network 26...............................
9.5.1 Single connection to PC/laptop 26...............................
9.5.2 Connecting to a network 27....................................
10 Shunt signal trigger 29.......................................
11 Status display 30............................................
12 Settings 31..................................................
12.1 Settings with the web browser 31...............................
12.1.1 System/Interface module 32....................................
12.1.2 System/Torque transducer 32..................................
12.1.3 System/Default settings 32.....................................