CD 2301 Order No. BA 92-12-0231A Issue 05.01.10 55
Switching the primary voltage
Attention: Compare the primary voltage specified on the type
plate with the voltage provided by your primary power supply.
The type plate is located on the backside of the power unit.
Primary voltage switch 115 V to 230 V:
Switch off power unit!
Attention: Observe jumper position!!
With wrong primary voltage setting, the power unit may be
damaged.
Switching the primary voltage may only be carried out by
sufficiently qualified personnel or by your service technician.
Before starting any repair or maintenance operation, always switch
the power unit off and disconnect the primary plug.
Do not wear a wrist watch or any electrically conductive jewellery.
To switch the primary voltage, proceed as described in section
7.1 (Safety Instructions), 7.3 (Tools to be Used) and 7.4 (Open
the Power Unit).
8 Appendix
8.2 Spare Parts
To Next Page
Loading...
