36
3.0 Handling HeartWare
™
HVAD
™
System Components
3.7 Setting Up Your HeartWare
™
HVAD
™
System Carrying Cases
(continued)
To Set Up and Use Your HeartWare
®
Shoulder Pack (continued):
6. Place the controller in the controller pocket.
7. Fasten the snap-on buttons to secure the controller.
8. Insert the batteries into the two battery pockets.
The extra battery cable length can be tucked into the
pocket with the battery.
Make sure the battery cables are not twisted or kinked.
9. Close the large ap.
10. Zip up both zippers.
11. Close both side magnetic aps.
Steps continued on next page
Figure 45
Figure 46
Figure 47
Figure 48
Figure 49
Figure 50
To Next Page
Loading...
