Technical Data and Accessories
7–10 Edition September 2000
ABC
Attention: The fluorescent lamps in particular are
waste that requires monitoring (EAK No. 200121),
they must be disposed of via a special waste or
underground waste dump or a correspondingly
equipped CPB treatment plant. Please discuss this
with your local waste disposal authority.
Materials
The device consists of recyclable materials. The
large plastic parts can be identified in the
following diagram with the help of their
designation. Polystyrene has been used almost
throughout.
Name Material
Front panel, back panel,
operating flap, service flap, lid
PS (Styron 6335), varnished with
2k-PUR-Alexit-Struckturlack Z421,
Messrs. Manckiewicz, no flame
retardant
Roller (2x) PA-6
Foot (2x) PC, varnished with 2k-PUR-Alexit-
Struckturlack Z421, Messrs.
Manckiewicz, no flame retardant,
galvanized sheet steel (glued)
Stray light foil PC/GF/Macrofol
LED cover PC/Macrolon
Light outlet PC/Macrolon
Brake lining Multifill 426 , Messrs. Garlock
1
To Next Page
Loading...
Need help?
General
