HEIDELBERG Nexscan F 4100 User Manual

Connecting
2–6 Edition September 2000
ABC
Switching on the Nexscan F 4100/F 4200
Operate the power switch on the
Nexscan F 4100/F 4200. It is located at
the right on the rear of the device.
Please ensure that the scanner lid
remains closed during the switch-on
sequence and that there is nothing on
the white balance strip.
The scanner boots automatically and
carries out extensive tests during the
initialization phase. It is ready for
operation after approx. 3 minutes.You
White balance strips You can now
operate the scanner by means of the
software.
Installing the Newcolor Software
For an exact and detailed description of the
installation procedure, please refer to the
Newcolor XXXX Installation manual.
Installing the LinoColor Software
For an exact and detailed description of the
installation procedure, please refer to the
LinoColor Installation manual.
White balance strip

HEIDELBERG Nexscan F 4100 Specifications

General

Brand	HEIDELBERG
Model	Nexscan F 4100
Category	Scanner
Language	English