Working with the Nexscan F 4100/F 4200
4–4 Edition September 2000
ABC
Securing the Originals
Lightly press the originals onto the glass plate and
secure them with adhesive tape or foil.
If the image is to be scanned wrong-reading
(e.g. in comparison to pre/coarse scan), you can
activate the desired mirroring by selecting a
mirroring in the software.
Such mirroring does not cause any loss in quality!
To obtain the bestpossible contrast and the
highest density, you should use passepartouts
which cover up the parts of the image outside the
scanning area when carrying out transparency
scanning.
The Passepartout frames should be at least
25 mm wide.
Inserting the Tray
Insert the mounting rail into the scanner
guide pins (1). You can then place the
tray into the mounting rail guide pins for
the tray (2).
Mirroring
Best Possible
contrast
1
2
To Next Page
Loading...
Need help?
General
