HEIDELBERG Nexscan F 4100 User Manual

Connecting
Nexscan F 4100/F 4200 – Operation 2–7
ABC
Note: To install the software, you need the CD with
the scanner ICC profiles, which is attached to the
back panel of the scanner.
Installing Calibration Data
Specific calibration data for your scanner is stored
in ICC profiles which are supplied on a CD. The CD
can be used for Newcolor and Linocolor (it is
attached to the back panel of the scanner).
Attention: Keep the CD in a safe place.
For Newcolor:
The CD is requested during the installation of
Newcolor XXXX and the ICC profiles are
transferred into the program. You can create new
ICC profiles yourself by means of the program.
For Linocolor:
If you wish to load the ICC profiles for your
scanner, click on ICC Profiles for Nexscan F4000
(from "Nexscan F4000 Profiles" CD) in the
Linocolor installation window.
The CD is requested during the installation
procedure.
2
Keep the CD
safe!
1

HEIDELBERG Nexscan F 4100 Specifications

General

Brand	HEIDELBERG
Model	Nexscan F 4100
Category	Scanner
Language	English