HEIDELBERG Nexscan F 4100 User Manual

Service and Maintenance
Nexscan F 4100/F 4200 – Operation 6–9
ABC
6. Reconnect the device and switch it on.
7. Carry out a basic level adjustment (Siehe
Seite 4–17).
Cleaning the Nexscan F 4100/F 4200
Attention: Isolate the device completely from the
power supply by pulling out the mains connection
plug before cleaning with a damp cloth!
Pollutants
When using cleaning agents or lubricants, pay
attention to manufacturer's instructions and
national regulations as well as safety data sheets.
Clean the surfaces of the device with a dry cloth.
If the device is very dirty, clean with a damp cloth
which has been dipped in dish-washing liquid and
well wrung.
Make sure that no liquid enters the device. Keep
the outlets of the device dry.
Never use abrasive cleaning agents or solvents!
1

HEIDELBERG Nexscan F 4100 Specifications

General

Brand	HEIDELBERG
Model	Nexscan F 4100
Category	Scanner
Language	English