HEIDELBERG Nexscan F 4100 User Manual

Unpacking and Installing
Nexscan F 4100/F 4200 – Operation 1–3
ABC
3. Removing parts of the box
Remove all cardboard box parts under
the scanner. A second person is requi-
red to slightly raise the scanner for this
purpose.
4. Pushing the scanner to the installation
site
Push or pull the scanner to the site
where it will be taken into operation.
However, allow approx. 1 m gap to the
wall as cables still need to be connected
later and the back panel must be scre-
wed on and off.

HEIDELBERG Nexscan F 4100 Specifications

General

Brand	HEIDELBERG
Model	Nexscan F 4100
Category	Scanner
Language	English