Service and Maintenance
6–14 Edition September 2000
ABC
Dry Finger Prints; Adhesive Tape Residue, Smudges
(Except for Acetone Rings, Refer to Cleaning with Acetone).
Attention: Ensure that no liquids enter
the interior of the device!
0
Apply or spray the glass or foam
cleaner onto the glass surface.
For foam cleaning: Shake the foam
cleaner before use, spray it onto the
glass plate and apply it using a cloth.
Wait until the foam has had time to
work.
0
Using a lint-free cloth, remove the
foam or glass cleaner by wiping the
cloth in the same direction applying a
little bit of pressure. Use several
cloths if necessary.
0
Subsequently clean with ethanol.
1
To Next Page
Loading...
Need help?
General
