HEIDENHAIN TNC 620 - Selecting Drives, Directories and Files

Fundamentals, File Management | Working with the file manager
4
174
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Selecting drives, directories and files
To call the file manager, press the PGM MGT key.
Navigate with a connected mouse or use the arrow keys or the soft
keys to move the cursor to the desired position on the screen:
Moves the cursor from the left to the right
window, and vice versa
Moves the cursor up and down within a window
Moves the cursor one page up or down within a
window
Step 1: Select drive
Move the highlight to the desired drive in the left window
To select a drive, press the SELECT soft key, or
Press the ENT key