Operation
034-11592_1.0_19.11.2018
110
7.7.2 Replacing battery
When the on-board computer indicates LOW BAT on
the screen, the battery is flat and must be replaced.
Figure 53: Display with attachment screw (1) and battery compartment
cover (2)
Remove the display from the handlebars by
unfastening the display attachment screw (1).
Use a suitable coin to open the battery
compartment cover (2).
Remove the used batteries.
Insert new CR 2016 batteries. You can obtain the
batteries recommended by Bosch from your
specialist dealer. Ensure that you place the poles in
the right position when inserting the batteries.
Close the battery compartment again and fasten
the on-board computer to your e-bike's handlebars
with the attachment screw (1).
WALK
WALK
WALK
1
2
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 110 Montag, 19. November 2018 11:00 11