Hercules Montfoort Cruise F7 - Adjusting the Handlebar Height

034-11592_1.0_19.11.2018
79
Before the first ride
6.2.1 Adjusting the handlebar height
CAUTION
!
Crash caused by incorrectly set clamping force
Excessively high clamping force will damage the quick
release and cause it to lose its function. Insufficient
clamping force will cause a detrimental transmission of
force. This can cause components to break. This will
result in a crash and injuries.
1
2
 Open the clamping lever.
 Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.
 You feel the locking lever click into place.
 Pull out the handlebars to the required height.
 Lock the quick release.
Figure 41: Open (2) and closed (1) clamping lever on the stem – example:
by.schulz speed lifter
 Never fasten a quick release using a tool (e.g.
hammer or pliers).
 Only use the clamping lever with the specified set
clamping force.
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 79 Montag, 19. November 2018 11:00 11