034-11592_1.0_19.11.2018
75
Before the first ride
Set the seat post at the required height.
.
3
4
2
1
Figure 38: Detailed view of the seat post – examples of the minimum insertion
depth marking
To close it, push the seat post clamping lever as far
as it will go into the seat post.
Check the clamping force of the quick releases.
6.1.4 Setting the height-adjustable seat post
When using your seat post for the first time, you
must give it a firm push downwards to set it in
motion. This is due to the natural tendency of the
seal to repel oil from the seal surface. You only
need to do this before the first use or after a longer
period of non-use. Once you have displaced the
post through its deflection, the oil spreads on the
seal and the post begins to function normally.
Crash caused by an excessively high seat post
setting
A seat post with is set too high will cause the seat post
or the frame to break. This will result in a crash and
injuries.
Do not pull the seat post out of the frame beyond
the minimum insertion depth marking.
CAUTION
!
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 75 Montag, 19. November 2018 11:00 11
To Next Page
Loading...