Hercules Montfoort Cruise F7 - Adjusting the Grip Distance on a Magura Brake Lever

034-11592_1.0_19.11.2018
83
Before the first ride
Figure 44: Brake lever grip distance
6.3.2.1 Adjusting the grip distance on a Magura brake lever
Alternative
Use a T25 TORX® wrench to turn the setting screw to
adjust the grip distance.
1
2
 Turn the setting screw in the minus (-) direction.
 The brake lever moves closer to the handlebar grip.
 Turn the setting screw in the plus (+) direction.
 The brake lever moves away from the handlebar
grip.
Figure 45: Using the setting screw (2) to adjust the distance from the brake
lever to the handlebar grip (1)
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 83 Montag, 19. November 2018 11:00 11