Maintenance
034-11592_1.0_19.11.2018
134
8.1.2.9 Cleaning the display
NOTICE
If water enters into the display, it will be permanently
damaged.
Carefully clean the display with a damp, soft cloth.
8.1.2.10 Cleaning the brake
WARNING
!
Brake failure due to water penetration
The brake seals are unable to withstand high
pressures. Damaged brakes can fail and cause an
accident with injury.
Clean brake and brake discs with a brush, water
and dish-washing detergent.
Clean brake discs thoroughly with brake cleaner or
spirit.
Never immerse the display in water.
Never clean with a high-pressure water device,
water jet or compressed air.
Never use cleaning agent.
Remove the display from the bicycle before
cleaning.
Never clean the bicycle with a high-pressure water
device or compressed air.
Take great care when using a hosepipe. Never
point the water jet directly at the seal section.
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 134 Montag, 19. November 2018 11:00 11
To Next Page
Loading...