Hercules Montfoort Cruise F7 - Turning the Handlebars to the Side

Before the first ride
034-11592_1.0_19.11.2018
80
6.2.2 Turning the handlebars to the side
Alternative
CAUTION
!
Crash caused by incorrectly set clamping force
Excessively high clamping force will damage the quick
release and cause it to lose its function.
Insufficient clamping force will cause a detrimental
transmission of force. This will result in a crash and
injuries.
 Open the clamping lever.
 Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.
 You feel the locking lever click into place.
 Pull out the handlebars to the required height.
 Lock the quick release.
Figure 42: Pulling locking lever upwards – example: by.schulz speed lifter
 Never fasten a quick release using a tool (e.g.
hammer or pliers).
 Only use the clamping lever with the specified set
clamping force.
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 80 Montag, 19. November 2018 11:00 11