034-11592_1.0_19.11.2018
71
Transportation, storage and assembly
Checking the headset backlash
To check the handlebar headset backlash, close
the quick release lever on the stem. Place the
fingers of one hand on the upper headset cup, pull
the front wheel brake with the other hand and try to
push the bicycle backwards and forwards.
The headset cup halves must not move towards
one another while you are doing this. Note that
there may be noticeable backlash due to worn-out
bearing bushes or brake lining backlash in
suspension forks and disc brakes.
If there is headset backlash in the steering headset,
you must adjust it as soon as possible; otherwise,
the headset will become damaged. You must make
the adjustment as described in the stem manual.
5.3.7 Sale of the bicycle
Fill out the data sheet on the first page of the
operating instructions.
Adjust the bicycle to the rider.
Set the stand and the shifter, and show the
purchaser the settings.
Instruct the operator or rider how to use all the
functions of the bicycle.
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 71 Montag, 19. November 2018 11:00 11
To Next Page
Loading...