1
Before the first ride
034-11592_1.0_19.11.2018
82
The brake lever moves closer to the handlebar grip.
Re-adjust the grip distance as necessary.
The lever pressure point activates sooner.
Figure 43: Using the twist knob (1) to adjust the pressure point
6.3.2 Adjusting the grip distance
WARNING
!
Crash caused by incorrectly set grip distance
If brake cylinders are set incorrectly or installed
wrongly, the braking power may be lost at any time.
Such damage may cause you to fall from the bicycle
and injure yourself.
The brake lever grip distance can be adjusted to
ensure that it can be reached more easily. Contact
your specialist dealer if the brake handle is too far from
the handlebars or is hard to use.
Once the grip distance has been set, check the
position of the brake cylinder and adjust it as
necessary.
Never correct the brake cylinder position without
special tools. Have a specialist dealer correct it.
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 82 Montag, 19. November 2018 11:00 11
To Next Page
Loading...