Table of figures
034-11421_0.1_10.10.2017
106
12 Table of figures
Figure 1: Type plate, example, 19
Figure 2: Bicycle, viewed from the right, example of Pasero, 24
Figure 3: Detailed view of bicycle from rider position, example, 25
Figure 4: Components of the wheel, example of front wheel, 26
Figure 5: Bicycle without suspension (1) and with suspension (2)
when riding over an obstacle, 27
Figure 6: Bicycle brake system with a disk brake, example, 28
Figure 7: Diagram of drive system, 29
Figure 8: Diagram of electric drive system, 30
Figure 9: Integrated battery details, 32
Figure 10: Details of the down tube battery from the right (I) and
left (II), 33
Figure 11: Seat tube battery details, 33
Figure 12: Display details, 35
Figure 13: Overview of the displays, 36
Figure 14: Overview of the command console, 40
Figure 15: Detailed view of the seat post, examples of the minimum
insertion depth marking, 50
Figure 16: Determining the saddle height, 51
Figure 17: Seat post quick release in the final position, 51
Figure 18: Suspension fork setting wheel, example, 53
Figure 19: Fork valve, example, 54
Figure 20: Brake lever (1) with knurled screw (2), 55
Figure 21: Attaching the display, 73
Figure 22: Fork lock on the suspension head with locking lever (1),
example, 79
Figure 23: Checking the chain and belt tension, 85
Figure 24: Wheel quick release, version I, with clamping lever (2),
fork (1) and setting nut (3), 89
Figure 25: Dunlop valve with union nut (1) and rim nut (2), 91
Figure 26: Presta valve with valve insert (1), knurled nut (2) and rim
nut (3), 92
Figure 27: Schrader valve with rim nut (1), 93
Figure 28: Adjusting sleeve (1) for the single-cable cable-operated
gear shift with shifter housing (2), example, 94
EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book Page 106 Wednesday, October 11, 2017 9:53 AM
To Next Page
Loading...