034-11421_0.1_10.10.2017
75
Operation
7.6.4 Using the running light
To switch on the running light, the drive system has to
be switched on already.
Press the lamp button briefly.
The running light is switched on, and the running
light symbol is displayed.
Press the lamp button briefly again.
The running light is switched off, and the running
light symbol is not displayed.
7.6.5 Selecting the level of assistance
Press the Plus button.
The level of assistance is increased.
Press the minus button.
The level of assistance is reduced.
7.6.6 Switching journey information
The displayed journey information can be changed and
partially reset.
Press the info button repeatedly until the journey
information is displayed.
7.6.7 Changing the system information
Press and hold the lamp button for three seconds.
Press the info button repeatedly until the journey
information is displayed.
Change values by pressing the minus and plus
buttons.
When the values are correct, press the info button
briefly.
Press and hold the lamp button for three seconds.
The journey information is displayed again.
EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book Page 75 Wednesday, October 11, 2017 9:53 AM
To Next Page
Loading...