034-11421_0.1_10.10.2017
79
Operation
7.9 Locking the front wheel suspension
When the fork lock is in the open position, the
suspension system has activated suspension and thus
provides the rider and the bicycle with relief. Riding
with the fork lock open should therefore be preferred
for everyday riding.
When riding downhill or at high speed, for instance,
the force which is exerted on the drive is absorbed by
the suspension system and reduced by up to 50%. In
these cases it is recommendable to close the
suspension fork.
The fork lock may be situated directly on the fork or on
the handlebars, depending on the version.
Figure 22: Fork lock on the suspension head with locking lever (1), example
In order to lock the front wheel
suspension, shift the locking
lever to the LOCK position.
In order to release the front
wheel suspension, shift the
locking lever to the OPEN
position.
EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book Page 79 Wednesday, October 11, 2017 9:53 AM
To Next Page
Loading...