Hercules PASERO - Electric Drive System; Switching on the Drive System; Switching off the Drive System

034-11421_0.1_10.10.2017
71
Operation
7.5 Electric drive system
7.5.1 Switching on the drive system

A sufficiently charged battery has been inserted on the
bicycle.
 The battery is firmly in place. The key has been
removed.
 Press and hold the On-Off button (display) for
2 seconds.
 If the drive system is switched on, the drive is
activated as soon as the pedals are moved with
sufficient force.
7.5.2 Switching off the drive system
The system switches off automatically ten minutes
after the last command. The are three options for
switching off the drive system manually.
1 Display On-Off key
 Press the On-Off button (display) once.
 The LEDs of the operating and charge status
indicator go out.
Crash caused by lack of readiness for braking
When it is switched on, the drive system can be
activated by the application of force on the pedals.
There is a risk of a crash if the drive is activated
unintentionally, and the brake is not reached.
 Never start the electric drive system, or switch it off
immediately, if the brake cannot be reached safely
and reliably.
CAUTION
!
EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book Page 71 Wednesday, October 11, 2017 9:53 AM