Maintenance
034-11421_0.1_10.10.2017
90
Checking and setting the clamping force of the
quick releases
If the clamping lever cannot be moved into its proper
final position by pushing it with the hand, or if it is too
loose, its clamping force will need to be readjusted.
Open the clamping lever completely.
Unfasten the setting nut a little.
Clamp the clamping lever.
If the clamping lever is not yet in the proper final
position, repeat the steps until the proper final
position has been achieved.
EN_034-11421_0.1_0.01_09.18_HERCULES BROSE_CS_Inhalt.book Page 90 Wednesday, October 11, 2017 9:53 AM
To Next Page
Loading...